The coolant in the car circulates through the engine and absorbs heat, then moves air through the radiator. Over time, this process causes the liquid to evaporate, so that the level gets lower. Therefore, it is important to always check the car engine coolant level, so that vehicle comfort is always maintained.

Important Information for Checking the Car Engine Coolant Level
A low coolant level can cause the engine to overheat quickly. This condition causes serious damage to the cylinder head gasket and water pump. In addition, cars also often experience coolant leaks. Regarding this, it is important to check the coolant regularly, so as not to cause problems later.
Make Sure the Car Engine is Cold Before Checking
Before checking the car’s cooling system, you need to make sure the car engine is cold first. You can let the car sit for a few hours after driving before removing the radiator cap. If not done, hot coolant can spray out and cause burns.
Reporting from the Driving Lesson Tips Youtube channel, checking the coolant level can be done by finding a white bottle. The bottle is transparent so it is easy to see the fluid level. When checking, pay attention to the hot condition of the engine. When the engine is hot, opening the fluid bottle can cause serious burns. Therefore, make sure the engine is cool before opening the bottle safely.
Location of the Coolant Level
The coolant reservoir is located under the hood with a special label, so it is easy for drivers to find. Referring to the manual, there are several important steps to prevent the coolant from the risk of freezing and corrosion.
This component has an L (low) and F (full) mark. The coolant tank is transparent, so drivers can see the coolant level without opening the cover.
Adding Coolant Level
If the car engine coolant level is close to or below the L mark, it is important to add more fluid to the reservoir. Before adding it, make sure the engine is cold and there is not too much pressure in it.
Low fluid level, indicated by the appearance of a warning light on the dashboard. In this condition, immediately add coolant until it reaches the F mark, but do not overdo it.
For information, if the vehicle overheats due to a system error, a warning will appear on the car dashboard. When the sign appears, check the coolant reservoir as explained. If unable, the driver can check through a professional mechanic.
Coolant, should be replaced routinely every 30,000 miles. However, it is important to note that each car has different handling. Therefore, checking the car engine coolant level must be done carefully and thoroughly. /Siti